DigiFab : StampaJet IN-64 : Digital Textile Printer with adhesive sticky belt system

StampaJet IN-64

StampaJet Printers

StampaJet K8-180 StampaJet R6-330
StampaJet I-64 StampaJet IN-64 StampaJet XP-64 StampaJet BP-150
StampaJet BP-64 StampaJet BP-54 StampaJet EN-64 StampaJet IN-500
StampaJet a new generation high speed textile printer, utilizing a self-cleaning adhesive belt transport system, designed for digital fabric printers who require fabric variety with high print speeds and exceptional quality. The StampaJet with its speed potential, ink and fabric versatility and color control, combined with a competitive price and small footprint opens new opportunities to textile digital printing. Download PDF

DigiFab's StampaJet Textile Printer FLAAR Report



StampaJet
Video on
YouTube

 
585 ft2/h Plug & Print digital textile printer
Industrial scale textile digital printing is finally made easy thanks to the StampaJet's top quality print results at production speeds of up to 39 linear yards per hour*. The machine is delivered fully assembled and tested, with Evolution Textile RIP ® software which makes it ready to print. It is sufficient to connect the electric power, air, water, load the inks and go. *Depending on color number, resolution and pass - see the production table on the back side of the brochure.
 

New print heads, speed, safety and quality
The StampaJet comes with the new extra wide variable dot Epson print heads, with 1440 nozzles per head, 4 times more the conventional print heads. The distance from the print heads and the fabric surface is automatically controlled by a sensor. A sophisticated laser device checks on the fly nozzle efficiency and prevents print faults.

Extra precision with the new belt drive
The adhesive fabric transportation belt prevents even the smallest movement of the substrate once in position, and ensures perfect registration. A precision twin roll unwind mechanism with photocell edge sensor guides the fabric precisely and smoothly onto the belt, whose glue is activated by heat, making the StampaJet ideal to print also on stretch fabrics without distortion.
 

Rotating cleaning unit
A rotating belt washing unit with open water circuit prevents 'back printing' by removing the excess of ink from the adhesive blanket. The entire washing unit is mounted under the belt system.
 

Hot air dryers
StampaJet ships with three hot air dyers. Two located between the belt and the rewinder to dry the printed fabric, and the third one just after the washing unit to dry out water traces from the belt, and pre-heat the blanket's surface to optimal working temperature of the thermoplastic adhesive.
 

Bulk ink supply system
The StampaJet can print with all acid, reactive, disperse, pigment and sublimation inks via a large capacity bulk ink feed system.

Download PDF
 

Technical Data

MODEL StampaJet
PRINTER Variable dot piezo print heads
Print heads - COLORS 4 extra wide 1440 nozzles piezo print heads
Each head 8 colors, 8 x180 nozzle rows
Print heads level Automatic print head level adjustment from substrate: 0 -7 mm
Print head cleaning Automatic print head cleaning cycle - automatic laser nozzles check
PRINT RESOLUTIONS 540 - 720 - 900 - 1080 - 1440 dpi a 4,6,8,12,16 pass - Unidirectional & Bidirectional
Fabric transport Twin roll unwind unit with edge sensor - Adhesive blanket – Twin roll rewind unit
Print width, roll size Maximum print width: 161 cm (63,3”) - maximum fabric roll diameter: 28 cm. ( 11”)
Print speed 4 Colors: 540x720 dpi, 4 pass, bidirectional, 585 ft2/h or 39 linear yd/h
8 Colors: 540x720 dpi, 6 pass, bidirectional, 375 ft2/h or 25 linear yd/h
8 Colors: 720x720 dpi, 8 pass, bidirectional, 315 ft2/h or 21 linear yd/h
8 Colors: 1440x1440 dpi, 16 pass, bidirectional, 120 ft2/h or 8 linear yd/h
Ink feed system Ink feed system 2 x 8 cartridges or optional external bulk feed system with 2 x 8 1500-2000 cc. tanks
Inks Acid, Reactive, Disperse, Pigments, Sublimation
4 colors: CMYK
8 colors: CMYK, red, blue, orange, grey
Interface USB 2.0
Noise level < 50 db
Dimensions Width: 10.5 ft - Depth: 5.25 ft - Height: 4.9 ft - Weight: 2,200 lb
Electric supply Printer: Ac200V - 240V - 50/60Hz
Belt system : 240V Single Phase 50/60Hz - 5 kw installed power - working power approx. 3 Kwh
Working environment Temperature range: 20-35 °C / 68-95 °F - Humidity 35%-65% rh

 
Our fabrics & software are compatible with several large format printers and inksOur fabrics & software are compatible with several large format printers and inks

Products

  • Digital InkJet Fabrics



    Ink Jet Fabric Printing
    Graphics & Textiles
    Sample Yardage
    Signs, Banners, Flags
    Art & Photo Reproduction

  • Equipment


    Large Format Printers
    Heat Press
    Digital Textile Fixer
    InkJet Fabrics Steamer
    Inkjet Fabrics Washer


  • Software


    CAD & RIP Software
    Textile & Graphic RIP
    Design, Repeat, Coloring
    RIP-on-the-fly printing for
    long yardage runs


  • Supplies


    Inks: Sublimation, Textile, Pigment, Reactive, Acid, Disperse, and more
    Papers: Transfer, other
    Parts: printers & heat presses


















Free CSS Templates by RamblingSoul.com | Valid XHTML 1.0 | CSS 2.0